Contact Us
TEL:+86-531-88904658
Fax: +86-531-88904658
Roger Tan:+86 18660147189
E-mail: roger@jiuzhuochina.com
Address:Qibei Industrial park Jinan ,Shandong
Home > Exhibition > Content
6105 aluminium alloy
Nov 08, 2016

6105 aluminium alloy

 

6105 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is one of the least common of the alloys in this series. While most wrought aluminium alloys are covered by multiple standards (from any mixture of ASTMENISO, and national standard bodies), 6105 is only dealt with in ASTM B221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes. It is formed by extrusion, and supplied in heat treated form. It can alternately referred to by the UNS designation A96105.

Chemical composition

The alloy composition of 6105 aluminium is:

·         Aluminium: 97.2 to 99.0%

·         Chromium: 0.1% max

·         Copper: 0.1% max

·         Iron: 0.35% max

·         Magnesium: 0.45 to 0.8%

·         Manganese: 0.1% max

·         Silicon: 0.6 to 1.0%

·         Titanium: 0.1% max

·         Zinc: 0.1% max

·         Residuals: 0.15% max

Properties

Typical material properties for 6105 aluminum alloy include:

·         Density: 2.69 g/cm3, or 168 lb/ft3.

·         Young's modulus: 70 GPa, or 10 Msi.

·         Ultimate tensile strength: 190 to 270 MPa, or 28 to 39 ksi.

·         Yield strength: 120 to 260 MPa, or 17 to 38 ksi.

·         Thermal Expansion: 21.8 µm/m-K.


Previous: 6162 aluminium alloy

Next: Aluminium Alloy 6101